九游会老哥

    您所在的位置:首頁 >九游会老哥产品 >WJ1400-7

    WJ1400-7

    • 1
    • WJ1400-7
    產品名稱:WJ1400-7
    產品介紹

    一、產品介紹


    1、本設備是桉樹、楊樹、鬆樹等雜樹木材加工的旋切機床,設備采用全自動數控旋切係統,是實用性及性價比較高的旋切機床。


    2、進刀電機采用伺服係統和交流異步係統(選裝)。


    3、變速係統采用鍋輪和硬麵(選裝)。


    4、此產品有WJ1400-7和1200-7(選配)。


    5、設備可加裝剩餘尾板剪齊功能(選裝)。


    二、特點


    1、采用粗牙加大螺杆進刀、進退刀速度快。


    2、全自動數控旋切係統,螺杆、導軌母套浸泡在機油裏,磨損小。


    3、重量重、精度高、承載力大、效率高、運行平穩、可靠性高、壽命長。


    4、WU1200-7,輥筒為整條,單輥和雙輥中間無軸承。潤滑好、進給精準、阻力小,電力損耗低。


    5、維修簡單、操作方便。


    I. product introduction


    1. This equipment is a rotary cutting machine bed for processing eucalyptus, poplar, pine and other miscellaneous trees. The equipment adopts a full-automatic numerical control rotary cutting system and is the rotary cutting machine bed with the highest practicability and cost performance.


    2. The feed motor adopts servo system and AC asynchronous system ( optional ).


    3. The speed change system adopts pan wheel and hard surface ( optional ).


    4. This product has WJ1400 - 7 and 1200 - 7 ( optional ).


    5. The equipment can be equipped with the function of trimming the remaining tailboards ( optional ).


    II. Characteristics


    1. Use coarse teeth to increase screw feed and feed speed.


    2. Full - automatic numerical control rotary cutting system. Screw rod and guide rail sleeve are soaked in engine oil with little wear.


    3. Heavy weight, high precision, large bearing capacity, high efficiency, stable operation, high reliability and long service life.


    4. WU 1200 - 7, the roller is whole, and there is no bearing between single roller and double roller. Good lubrication, accurate feeding, low resistance and low power loss.


    5. Simple maintenance and convenient operation.